产品: ELPESPEC® Auxiliary Products

• Polyamide cup with stainless steel nozzle
• for a fast approximate determination of coating viscosity for roller coating, curtain coating or spray application
• easy to handle
• ideal for production and incoming goods inspection

• 用于许多单组份和双组份丝印油墨，油墨未指定专用稀释剂或缓凝剂的产品
• UV 5000用于降低粘度
• UZ 5100降低粘度的同时也会延长丝网放置时间

• 半挥发溶剂，可以溶解大多数三防漆
• 用于稀释和清洁功能
• 专用产品可靠品质

• semi-volatile solvent without hydroxyl groups with good dissolving capacity for many coating materials
• used for thinning or cleaning
• specified and certified quality

• 防止并消除PCB印刷过程中的静电积聚
• 在光刻胶干燥时，在丝网印刷过程中消除由粉尘引起的问题
• 高效，操作简单，使用安全
• HP 5500 喷雾罐包装
• HP5501适用于喷涂，浸涂或用刷子或布刷涂

• 屏幕不工作后，可直接喷涂到屏幕线路上溶解敷形涂层材料，无需复杂的清洗过程
• 高效、快速
• 无硅无油脂，意味着中表面无破坏/除湿，在后续印刷过程无拖尾

• 用于全自动丝网印刷洗涤器，极高闪点(> 100 °C)
• 蒸汽压很低  < 0.1 hPa  20 °C。因此按照欧盟标准 它不属于挥发性有机化学物（VOC）  1999/13/ EC
• 无需按德国危险品申报，易生物降解  依据OECD 测试301 A

• 快速强劲的清洗效果
• R5814/ R5817：直接去除从屏幕、工具、及故障线路上的涂层材料，R5814味道比R5817小一些，R5817清洁更为快速。
• R5821：闪点高（+32°C），适用于屏幕自动洗涤器和清洗加工设备上的油墨

• polyester strips with different accurately defined density steps
• for determination of exposure parameters

• 用于碱性显影剂溶液消泡， 如： 1%的苏打溶液
• 无硅，可生物降解

• 适用于去除已曝光和潜在固化的光成象阻焊剂（如 故障曝光后）
• 适合清洗涂层显影剂和抗蚀剂汽提设备，批量清洗剂可多次重复使用

• 用于丝网印刷或刷涂 
• 黄绿色  单组份
• UV固化
• auxiliary products recommended: 防静电喷雾剂/抗静电剂 HP 5500⇗, 清洗剂 R 5899, R 5821 and R 5817⇗

• 用于刷涂
• 绿色不透明，单组份涂层材料
• 室温固化，有利于组装PCB焊接过程成后的维修，因其往往不能承受进一步的热应力
• Recommended auxiliary product: 清洗剂 R 5817⇗

• 涂在封装材料和包装材料内部， 防止静电积聚，去除导电静电荷
• 刷涂或喷涂
• 室温固化
• 推荐清洗剂 R 5817⇗

• Conformal coating in theory and practice: Basics, composition of coatings, chemical/physical properties, application and drying processes, evaluations and specifications, characteristics of conformal coatings, corrosion and failure mechanisms, trouble shooting
• author: Dr. Manfred Suppa, Head of Research & Development (1998 - 2016) at Lackwerke Peters GmbH & Co. KG
• order form / flyer

• For the partial covering of assembled PCBs undergoing wave soldering
• easy application from the handy squeeze bottle, ready-to-use
• dries at room temperature
• peelable

• Dip cup acc. to DIN 53211: polyamide cup with 4 mm stainless steel nozzle
• for a fast approximate determination of conformal coating viscosity
• easy to handle
• ideal for production and incoming goods inspection

• Dispensing pistol and dispensing needles fitting the 30 and 55 ml cartridges of ELPEGUARD dam-and-fill gels
• standard dispensing needle Standard no. 14, Ø 1.60 mm
• standard dispensing needle Standard no. 18, Ø 0.84  mm
• standard dispensing needle Standard no. 22, Ø 0.41 mm
• standard dispensing needle 45° curved, no. 16, Ø 1.65 mm

• cleaning agent for conformal coatings, thick film coatings and gels (if no dedicated cleaning agent is specified in the Technical Report)
• for cleaning of workplace, tools and coating units; rapid and intensive cleaning effect

• cleaning agent for moisture crosslinking silicone coatings
• for cleaning of coating units; rapid and intensive cleaning effect

• 去除集成组装线路板上的残留焊锡

• For the reliable removing of conformal coatings from carriers, e.g. ELPEGUARD conformal coatings based on acrylate/polyurethane/epoxy resins
• high performance
• aqueous, biodegradable
• high user safety

• 涂在封装材料和包装材料内部， 防止静电积聚，去除导电静电荷
• 刷涂或喷涂
• 室温固化
• 推荐清洗剂 R 5817⇗

The Bubble-free kit comes as a aluminium desiccator with polycarbonate lid, manometer and vacuum pump. The transparent lid allows oberservation of the degassing process. Quantities of > 500 g material can be evacuated in one step.

• 无溶剂胶用于电子和电气工程上密封作用
• 自粘胶

• 粘附力促进剂  用于 Wepox 和Wepuran灌封材料

• 粘附力促进剂 用于 Wepesil灌封材料

• 无溶剂、不含硅和油脂
• 在ELPECAST 灌封材料应用工艺中的辅助产品
• 灌封件表面的预处理，固化后，灌封材料可很容易去除且无残留。

• 用于Wepuran灌封材料的促进剂
• 缩短固化时间和操作时间，建议用于设备混合配料

• 用于清洗工作厂所和工具
• 清洗快速、彻底

• for cleaning the "Bubble-free basic" desiccator
• gentle cleaning even of very dirty surfaces soiled with casting compound
• high quality cotton cloth, soft and fluff-free, hard-wearing, absorbent

• 涂在封装材料和包装材料内部， 防止静电积聚，去除导电静电荷
• 刷涂或喷涂
• 室温固化
• 推荐清洗剂 R 5817⇗