| By accessing the Technical Reports on the following pages you accept our conditions of use. | ||||||
| Products: Complete survey of the product groups | ||||||
|
Solder flux lacquer for temporary protection of
non-assembled pcbs against corrosion
(also
a soldering aid) |
 |
|||||
 |
||||||
Group 2:
SD 2050 UV to SD 2990 TCircuit printing lacquers
Etch and plating resists, solder resists, via hole fillers,
marking inks, carbon-conductive inks, peelable solder masks, plugging pastes,
heatsink pastes, thick film fillers |
||||||
| for highest resolution: ELPEMER® photoimageable etch resists, solder resists and marking inks |
 |
|||||
|
|
||||||
|
to cast assembled pcbs, print and mini transformers, transformer and magnetic coils, etc., on account of their transparency also suitable for opto electronics, optical sensors, etc., on epoxy resin, polyurethane resin or silicone rubber basis |
|
|||||
|
|
||||||
|
to cast assembled pcbs, print and mini transformers, transformer and magnetic coils, etc., on account of their opaqueness simultaneiously offer visual protection, available in many colour and viscosity adjustments, on epoxy resin, polyurethane resin, and silicone rubber resin basis |
||||||
|
|
||||||
|
thinners, retarders, screen openers, thick-film emulsion for the production of screen printng stencils, anti-static sprays, special strippers, defoamants for acid or (aqueous-) alkaline baths, cleaning agents for screens, screen washing equipment and lacquer application equipment |
||||||
|
|
||||||
|
for numerous gluing requirements in the electronics and electrical engineering industries, e.g. mounting glues to fix components for wave soldering |
||||||
|
|
||||||
|
for application by means of trickle feed, to impregnate and insulate all kinds of coil bodies, especially for high-revolution mini armatures |
||||||
|
|
||||||
|
casting and filling comounds for electronic components, magnetic coils and coil bodies, that have to fulfil special requirements, e.g. engines for chemical plants, marine and railway engines, etc.; electronic putties for the electro-mastics mechanical engineering industries |
||||||
|
|
||||||
|
for the electrical engineering industry, to insulate impregnated coils and windings, protection against corrosion and air-borne rust in case of transformer plates, partially also suitable as conformal/permanent coatings for assembled pcbs. |
||||||
|
|
||||||
|
covering insulation lacquers for the electrical engineering mechanical engineering industries, to insulate impregnated coils and windings, power rails, motor and transformer cases; protection against moisture, partially also suitable as conformal/permanent coatings for assembled pcbs. |
||||||
|
|
||||||
|
Impregnating varnishes for all kinds of coil bodies, especially for transformer coils |
||||||
|
|
||||||
|
Conductive lacquer, sealing mastic, adhesion promoters, mould release agents, cleaning agents |
||||||
|
|
||||||
| Please observe that in some countries not all of our products are available in small quantities. Therefore, please contact your corresponding local agency. | ||||||
|
|
||||||
| Lackwerke Peters GmbH + Co KG, Hooghe Weg 13, 47906 Kempen, Tel.: +49 (0) 2152-2009-0, Fax.: -70, peters@peters.de, www.peters.de, impressum | ||||||
Group 1:
Group 3:
Group 5:
Group 6:
Group 7:
Group 8:
Group 9:
Group 11:
Group 13: